 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Document 629 Flyback Transformer Core material Ferrite For Maxim MAX5941B PWM Controller * Flyback transformer for 13 W PoE applications * Designed to operate with 30 - 60 V input at 275 kHz * 1500 Vrms isolation from primary to secondary windings Terminations RoHS tin-silver over tin over nickel over phos bronze. Other terminations available at additional cost. Weight 5.5 g Ambient temperature -40C to +125C Storage temperature Component: -40C to +125C. Packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 200 per 13 reel Plastic tape: 44 mm wide, 0.4 mm thick, 28 mm pocket spacing, 9.6 mm pocket depth PCB washing Only pure water or alcohol recommended Inductance Inductance DCR max (Ohms)4 Part Power at 0 A2 at Ipk3 number1 (W) 10% (H) min (H) pri sec bias GA3271-AL_ 13 117.5 104.0 0.201 0.06 0.335 1. When ordering, please specify termination and packaging codes: Leakage Turns ratios6 inductance5 max (H) pri :sec pri :bias 0.815 1 : 0.457 1 : 0.571 Ipk3 (A) Output7 1.0 12 V, 1.0 A GA3271-ALD Termination: L =RoHS tin-silver over tin over nickel over phos bronze. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: D = 13 machine-ready reel. EIA-481 embossed plastic tape (200 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance is for the primary, measured at 250 kHz, 0.1 Vrms. 3. Peak primary current drawn at minimum input voltage. 4. DCR for the primary and for the secondary are with the windings connected in parallel. 5. Leakage inductance is for the primary windings with the secondary windings shorted. 6. Turns ratios are with the primary the secondary windings connected in parallel. 7. Output of the secondary is with the windings connected in parallel. Bias winding output is 15 V, 20 mA. 8. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. Dot indicates pin 1 1 12 0.677 max 17,20 6 GA3271-AL 7 0.865 max 21,97 1 2 Pri 11 12 10 Bias 3 8 7 Sec 6 5 0.135 3,43 0.340 max 8,64 0.004 /0,10 Recommended Land Pattern 1 0.693 17.60 0.098 2,5 12 6 0.079 2,01 0.028 0,72 0.665 16,88 0.590 14,98 7 Primary windings and secondary windings to be connected in parallel on PC board. 0.07 1,79 1 12 0.098 2,5 Specifications subject to change without notice. Please check our website for latest information. Document 629 Revised 10/28/08 (c) Coilcraft, Inc. 2009 |
Price & Availability of GA3271-AL
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |